Contact Us

Directions to Doble Engineering Headquarters

Doble Engineering Company
85 Walnut Street
Watertown , MA 02472
Phone: 617-926-4900

From Logan Airport

To MASS. TURNPIKE WEST (heading away from Boston from Logan Airport to Watertown):

  • Follow one-way flow of traffic exiting from the airport. Bear LEFT and follow signs reading Route 1.
  • Follow traffic about 1/4 mile to the Sumner Tunnel. Go through the tunnel (toll $1.00), and at the end of the tunnel, take a street-level hard RIGHT and first LEFT under the overhead, to the ramp to the Expressway South.
  • A short distance ahead, the Expressway enters a tunnel. Go completely through the tunnel, but as you go through the tunnel get into the RIGHT lane, so that you can take an immediate exit to your RIGHT to the Mass. Turnpike West.

Mass Turnpike Heading West

FROM MASS. TPK. TO DOBLE (heading west, away from Boston ):

  • Get off Mass. Turnpike at Exit 17.
  • At the end of the ramp, bear RIGHT onto Centre Street (which later becomes Galen St.)
  • Follow Galen St. about 1/3 mile over the Charles River Bridge, keeping to the RIGHT as you approach the traffic signals in Watertown Square.
  • Go straight through the Square onto Mt. Auburn St. (Rt.16).
  • Proceed about 1/2 mile to Walnut St. on the RIGHT, at the third set of traffic signals from the Square.
  • Doble Engineering is approximately 1/4 mile down Walnut St., on the RIGHT.

Mass Pike Heading East

FROM MASS. TPK. TO DOBLE (heading east, toward Boston ):

  • Get off Mass. Turnpike at Exit 17.
  • At the end of the ramp, bear LEFT and take the first LEFT as the road passes over the Turnpike; then bear extreme RIGHT to get onto Centre Street (which later becomes Galen St.)
  • Follow Galen St. about 1/3 mile over the Charles River Bridge, keeping to the RIGHT as you approach the traffic signals in Watertown Square.
  • Go straight through the Square onto Mt. Auburn St. (Rt.16).
  • Proceed about 1/2 mile to Walnut St. on the RIGHT, at the third set of traffic signals from the Square.
  • Doble Engineering is approximately 1/4 mile down Walnut St., on the RIGHT.


Doble is an ISO 9001:2000 Certified Company. © 2008 Doble Engineering Company
All Rights Reserved. View our Privacy Statement.