Doble Engineering

Doble Products & Services for Partial Discharge (PD) Detection and Monitoring

Doble now offers a complete line of partial discharge monitoring and analysis test equipment. A thorough condition-based maintenance program should include a selection of tools for continuous on-line monitoring and detection of Partial Discharge (PD) in HV apparatus. Following the initial detection of PD, the results can be further verified by high precision off-line techniques and appropriate corrective action taken.

I. Survey Instruments and Testing

PDS100 - Partial Discharge Surveyor

The PDS100 provides complete substation PD survey capabilities. By simply walking around HV apparatus, sources of PD and external interference can be detected and identified. Routine RFI surveying will assist in locating PD activity while the apparatus is still in service.
► Click Here for the PDS100 Brochure

DFA100 - Dielectric Fault Analyzer

The DFA100, Dielectric Fault Analyzer, is a handheld, battery-powered instrument for monitoring non-intrusive, in-service acoustic signals produced by partial discharge and loose components.
► More

DFA100 for Gas Insulated Substations

The DFA100 for GIS is a hand-held instrument for acoustic diagnosis of Gas Insulated Substations. It is a battery-powered instrument for detection and location of defects in the insulation of GIS systems. The DFA100 includes an acoustic emission (AE) sensor to detect acoustic signals from a range of defects such as bouncing particles, protrusions and mechanical loose parts. DFA100 is a further development of its predecessor AIA, a widely known and accepted tool for diagnosis of GIS.
► More

DFA100 for Cable Applications

The DFA100, a hand-held instrument also for diagnosis of cable accessories. It is a battery powered instrument for detection and location of internal Partial Discharge (PD) in the insulation of cable accessories. The DFA100 includes an acoustic emission (AE) sensor and an acoustic wave guide consisting of insulated hot sticks.
► More

II. Periodic Online Monitoring

PD-Smart - Partial Discharge Analyzer

The Doble Lemke PD-Smart is a versatile, multi-application partial discharge (PD) analyzer especially designed for day to day field use. With its easy-to-use software interface and capability to conduct both on-line and off-line measurements, there really is very few places you can’t use a PD-Smart. It is well established that partial discharge activity is one of the leading indications of insulation health and should be measured as part of an asset management program.

► Click Here for the PD-Smart Brochure

TD-Smart - Measuring Sensor

High-precision, modular acquisition and analysis system for measuring current and key characteristics of electrical equipment, including dissipation factor and capacitance.

► Click Here for the TD-Smart Brochure

III. Permanent Online Monitoring

MachineGuard PD Monitoring System

Doble offers a complete solution for monitoring Partial Discharge on rotating machines. The system includes the Doble PD-Guard, couplers, calibrators, interference rejection sensors, and all necessary connectors. Of course, the system comes with Doble’s world class support.
► Click Here for the MachineGuard Brochure

Why is MachineGuard simply the most advanced PD monitoring system? Click here to check out the spec!

FailSafe LF & Capacitive Couplers

Doble offers a variety of capacitive couplers that allow for decoupling of PD signals from various electrical sources. Featured is the FailSafe LF Coupler. This coupler allows for continuous online monitoring of rotating machines at lower frequencies than traditional HF couplers. Lower frequencies allow for the whole stator to be monitored, not just the first few coils. In addition, the unit does not compromise the reliability of the system by incorporating a fused element that safely removes the coupler in the event of a failure.
► Click Here for the FailSafe LF Couple Brochure

TransformerGuard PD Monitoring System

TransformerGuard is a solution for monitoring PD activity in transformers. It is equipped with a PD-Guard/UHF that allows for the connection of various UHF sensors that can be either mounted through tank hatches or inserted through an oil drain valve. UHF technology allows for detection of PD activity deep within transformer windings without attenuation. Doble’s experts will assist you in analysis.
► Click Here for the TransformerGuard Brochure

TerminationGuard PD Monitoring System

TerminationGuard is a condition based monitoring system for assessing the condition by cable terminations in the field. Once installed in the field, the most likely place for a cable to fail is either at splices or terminations. TerminationGuard targets the terminations and can reliably assess their condition by using the latest in UHF PD based technology. By monitoring the in-service partial discharge, the insulation performance can be monitored over time and corrective action can be taken before a failure occurs.
► Click Here for the TerminationGuard Brochure

PD-Guard and PD-Guard/UHF

At the heart of an online, rugged continuous PD monitoring system is the PD-Guard. The PD-Guard is used in Doble’s various online monitoring systems for both transformers and rotating machines. With advanced signal processing, interference suppression and advanced PD analysis software, reliable decisions can be made in real-time. The system is scalable allowing for multiple PD-Guards to monitor several (and different) apparatus through a central evaluation server.
► Click Here for the PD-Guard & PD-Guard/UHF Brochure
► Click Here for the PD-Guard & PD-Guard/UHF Technical Specifications Brochure

IV. Service Programs

DobleGuard Services:
It’s hard to maintain cutting edge PD experts on staff. If you have purchased or leased a Doble PD system, DobleGuard Services are available for you. DobleGuard Services gives you access to a PD expert whenever you need assistance by phone and provides your with written reports.

A Doble Engineer will provide you with quarterly reports based on your online PD Monitoring system test data. This report will provide you with:

Current Dielectric Insulation Condition
Recommendation for future testing of continued monitoring
Best diagnosis of failing condition to include characterization of fault
Fine tuning of alarm and test system functionality

You also get 1 day of training every year on PD analysis and how to properly user your PD monitoring system.

How to get DobleGuard Services:

For Leased Systems
DobleGuard Services are automatically included in your leased contract price. You also have the security of knowing your system is covered for replacement or upgrades.

For Purchased Systems
DobleGuard can be included in your Doble services contract. A single contract covers 4 DobleGuard Systems per year and can be a mix of Doble’s PD-Guard based monitoring systems.

On-Site Testing & Knowledge Services:
Doble offers global services with a local presence!

With engineers located in 11+ countries, Doble can come on site, perform testing and provide comprehensive reports.

For more information about Doble PD Solutions, email to PDinfo@doble.com or call the Doble office nearest you

Home • Contact Us • News • Search
About Doble • Products • Services • Events • Support • Log in