Loading Events
Find Events

Event Views Navigation

Event Locations

Reset Filters

Upcoming Events › Protection

Events List Navigation

January 2019

Application & Testing Electro-Mechanical & Microprocessor Relays (Intermediate)

January 22, 2019 - January 24, 2019
Doble Engineering Company (Morrisville, NC), 2200 Gateway Centre Blvd (Suite 207)
Morrisville, NC 27560 United States
+ Google Map

This Application and Testing Electro-Mechanical and Microprocessor Relays course covers the testing of distance, differential, rate of change of frequency, loss of field, reverse power and synchronizing relays. The course will start with intermediate level instruction on the construction and principles of electro-mechanical /microprocessor relays, including different components of the relay that need calibration and adjustments as part of testing. A brief description of the relays’ operating principles will also be presented, followed by hands-on testing of the relays using Doble relay test sets.

Find out more »

February 2019

Life of a Transformer

February 11, 2019 - February 15, 2019
Red Rock, 11011 W Charleston Blvd
Las Vegas, NV 89135 United States
+ Google Map

The World's Premier Training Experience on the Most Critical Aspects of Large Power Transformers. Learn practical information from industry experts for immediate, measurable impact at any point in the life-cycle of your transformers.

Find out more »

Transformer Protection—Theory, Application, Setting Guidelines, and Testing Demonstration Hosted by Powell Industries

February 26, 2019 - February 28, 2019
Powell Industries, 7232 Airport Blvd.
Houston, TX 77061 United States
+ Google Map

This Transformer Protection course is intended for both engineers and technicians involved with application of transformer protection relays that are used to protect an extremely valuable asset.
Transformer protection and differential protection in particular is complicated due to different voltage levels and angular shifts of voltage and currents when dealing with delta-wye transformers. The differential protection applied at transformers must also be able to correctly differentiate between transformer inrush and an actual internal fault.

Find out more »

Application & Testing Electro-Mechanical & Microprocessor Relays (Basic)

February 26, 2019 - February 28, 2019
Tulsa Training Facility, 7780 E 106th Street
Tulsa, OK 74133 United States
+ Google Map

This Application and Testing Electro-Mechanical and Microprocessor Relays course covers the testing of simple overcurrent relays such as time overcurrent, under/overvoltage and over/under frequency electro-mechanical relays. The course will start with basic level instruction on the construction and principles of electro-mechanical /microprocessor relays, including different components of the relay that need calibration and adjustments as part of testing. A brief description of the relays’ operating principles will also be presented, followed by hands-on testing of the relays using Doble relay test sets.

Find out more »

March 2019

Application & Testing Electro-Mechanical & Microprocessor Relays (Advanced)

March 5, 2019 - March 7, 2019
Doble Engineering Company (Morrisville, NC), 2200 Gateway Centre Blvd (Suite 207)
Morrisville, NC 27560 United States
+ Google Map

This Application and Testing Electro-Mechanical and Microprocessor Relays course covers advanced testing involving communication assisted protection, analysis of event reports, COMTRADE and ss1 files, line current differential relays, bus differential and out-of step protection testing.

Find out more »

Application & Testing Electro-Mechanical & Microprocessor Relays (Intermediate)

March 20, 2019 - March 22, 2019
Doble Engineering Company (Morrisville, NC), 2200 Gateway Centre Blvd (Suite 207)
Morrisville, NC 27560 United States
+ Google Map

This Application and Testing Electro-Mechanical and Microprocessor Relays course covers the testing of distance, differential, rate of change of frequency, loss of field, reverse power and synchronizing relays. The course will start with intermediate level instruction on the construction and principles of electro-mechanical /microprocessor relays, including different components of the relay that need calibration and adjustments as part of testing. A brief description of the relays’ operating principles will also be presented, followed by hands-on testing of the relays using Doble relay test sets.

Find out more »

Application & Testing Electro-Mechanical & Microprocessor Relays (Basic)

March 26, 2019 - March 28, 2019
Tulsa Training Facility, 7780 E 106th Street
Tulsa, OK 74133 United States
+ Google Map

This Application and Testing Electro-Mechanical and Microprocessor Relays course covers the testing of simple overcurrent relays such as time overcurrent, under/overvoltage and over/under frequency electro-mechanical relays. The course will start with basic level instruction on the construction and principles of electro-mechanical /microprocessor relays, including different components of the relay that need calibration and adjustments as part of testing. A brief description of the relays’ operating principles will also be presented, followed by hands-on testing of the relays using Doble relay test sets.

Find out more »

April 2019

Application & Testing Electro-Mechanical & Microprocessor Relays (Intermediate)

April 2, 2019 - April 4, 2019
Doble Engineering Company (Morrisville, NC), 2200 Gateway Centre Blvd (Suite 207)
Morrisville, NC 27560 United States
+ Google Map

This Application and Testing Electro-Mechanical and Microprocessor Relays course covers the testing of distance, differential, rate of change of frequency, loss of field, reverse power and synchronizing relays. The course will start with intermediate level instruction on the construction and principles of electro-mechanical /microprocessor relays, including different components of the relay that need calibration and adjustments as part of testing. A brief description of the relays’ operating principles will also be presented, followed by hands-on testing of the relays using Doble relay test sets.

Find out more »

2019 International Conference of Doble Clients

April 7, 2019 - April 12, 2019
Westin Boston Waterfront Hotel, 425 Summer Street
Boston, MA 02210 United States
+ Google Map

The world’s premier conference for the electric power industry. Addressing the concerns of the power industry through education, discussion and collaboration.

Find out more »

Application & Testing Electro-Mechanical & Microprocessor Relays (Basic)

April 23, 2019 - April 25, 2019
Doble Engineering Company (Morrisville, NC), 2200 Gateway Centre Blvd (Suite 207)
Morrisville, NC 27560 United States
+ Google Map

This Application and Testing Electro-Mechanical and Microprocessor Relays course covers the testing of simple overcurrent relays such as time overcurrent, under/overvoltage and over/under frequency electro-mechanical relays. The course will start with basic level instruction on the construction and principles of electro-mechanical /microprocessor relays, including different components of the relay that need calibration and adjustments as part of testing. A brief description of the relays’ operating principles will also be presented, followed by hands-on testing of the relays using Doble relay test sets.

Find out more »
+ Export Events

Doble Engineering Company

Doble Engineering Company