Events Overview

Knowledge is what helps you make informed decisions. That’s why Doble hosts technical conferences, seminars, user group meetings and participates in power industry events. We bring a century of knowledge and expertise to these educational opportunities, establishing a community of learners who exchange best practices, share knowledge and define the future of our industry.

Education is one of Doble’s founding principles. We are committed to your professional development and are proud to be an Authorized Provider of Continuing Education Units (CEUs) and a member of the International Organization of Continuing Education and Training (IACET), an ANSI Standard.

Loading Events

← Back to Events

Doble Engineering Company

+1 617 926 4900||https://www.doble.com/events/

Upcoming Events

June 2019

2019 Protection Seminar

June 3, 2019 - June 6, 2019
Hard Rock Hotel San Diego, 207 Fifth Ave
San Diego, CA 92101 United States
+ Google Map

The Protection Seminar brings together managers, engineers and technicians who work in protection testing across generation, transmission and asset management.

Find out more »

Fault Calculation and Symmetrical Components

June 4, 2019 - June 5, 2019
Doble Engineering Company (Morrisville, NC), 2200 Gateway Centre Blvd (Suite 207)
Morrisville, NC 27560 United States
+ Google Map

Fault currents and their related symmetrical components are very critical in analyzing relay performance, making this course vital for all protection engineers involved with any aspect of relay protection.

Find out more »

Application & Testing Electro-Mechanical & Microprocessor Relays (Advanced)

June 12, 2019 - June 14, 2019
Doble Engineering Company (Morrisville, NC), 2200 Gateway Centre Blvd (Suite 207)
Morrisville, NC 27560 United States
+ Google Map

This Application and Testing Electro-Mechanical and Microprocessor Relays course covers advanced testing involving communication assisted protection, analysis of event reports, COMTRADE and ss1 files, line current differential relays, bus differential and out-of step protection testing.

Find out more »

Circuit Breaker Testing Fundamentals & SF6 Gas Handling Fundamentals

June 17, 2019 - June 20, 2019
DILO Company, Inc, 11642 Pyramid Dr.
Odessa, FL 33556 United States
+ Google Map

LEARN MORE

Find out more »

Application & Testing Electro-Mechanical & Microprocessor Relays (Basic)

June 18, 2019 - June 20, 2019
Tulsa Training Facility, 7780 E 106th Street
Tulsa, OK 74133 United States
+ Google Map

This Application and Testing Electro-Mechanical and Microprocessor Relays course covers the testing of simple overcurrent relays such as time overcurrent, under/overvoltage and over/under frequency electro-mechanical relays. The course will start with basic level instruction on the construction and principles of electro-mechanical /microprocessor relays, including different components of the relay that need calibration and adjustments as part of testing. A brief description of the relays’ operating principles will also be presented, followed by hands-on testing of the relays using Doble relay test sets.

Find out more »

RTS Advanced Developer

June 18, 2019 - June 20, 2019
Tulsa Training Facility, 7780 E 106th Street
Tulsa, OK 74133 United States
+ Google Map

During the RTS Advanced Developer Training, years of behind-the-scenes development will be exposed. This course takes an in-depth look at the newest advancements available with RTS software and presents insights on the virtually limitless possibilities of this powerful relay testing application.

Find out more »

Essentials of Protection – Beginners Level for Technicians

June 25, 2019 - June 27, 2019
Doble Engineering Company (Morrisville, NC), 2200 Gateway Centre Blvd (Suite 207)
Morrisville, NC 27560 United States
+ Google Map

A must for technicians who are setting out to build a career in relay testing. This course has all the basics to propel you forward and prepare you with the tools and techniques you need.

Find out more »

Transformer Fundamentals

June 25, 2019 - June 27, 2019
DoubleTree by Hilton Hotel Houston Hobby Airport, 8181 Airport Blvd
Houston, TX 77061 United States
+ Google Map
Find out more »

Condition Assessment Through Laboratory Diagnostics

June 27, 2019
Doble Engineering Company (Houston, TX USA), 1000 South Loop West, Suite 100
Houston, TX 77054 United States
+ Google Map
Find out more »

July 2019

Basics of Protection for Utilities

July 9, 2019 - July 11, 2019
Doble Engineering Company (Morrisville, NC), 2200 Gateway Centre Blvd (Suite 207)
Morrisville, NC 27560 United States
+ Google Map

The Basics of Protection Course for Utilities is designed to provide a practical overview of protection principles and application as it applies to electric utilities. Presented from a straightforward perspective, this course focuses on technical issues often encountered during work.

Find out more »

RTS Essentials

July 16, 2019 - July 17, 2019
Tulsa Training Facility, 7780 E 106th Street
Tulsa, OK 74133 United States
+ Google Map

RTS Essentials provides a chance to get up-to-speed in a hurry. Technicians and engineers who are new to relay testing that need to learn the basics behind what RTS does and get proficient with using RTS will want to attend this course.

Find out more »

Current Transformer Testing Fundamentals

July 16, 2019 - July 17, 2019
Doble Engineering Company (Ontario, California), 1520 S Hellman Ave
Ontario, CA 91761 United States
+ Google Map
Find out more »

August 2019

Transformer Fundamentals

August 6, 2019 - August 8, 2019
Doble Engineering Company (Morrisville, NC), 2200 Gateway Centre Blvd (Suite 207)
Morrisville, NC 27560 United States
+ Google Map
Find out more »

Condition Assessment Through Laboratory Diagnostics

August 8, 2019
Doble Engineering Company (Morrisville, NC), 2200 Gateway Centre Blvd (Suite 207)
Morrisville, NC 27560 United States
+ Google Map
Find out more »

Basics of Protection for Industrials

August 13, 2019 - August 15, 2019
Doble Engineering Company (Morrisville, NC), 2200 Gateway Centre Blvd (Suite 207)
Morrisville, NC 27560 United States
+ Google Map

The Basics of Protection Course for Industrials is designed to provide a practical overview of protection principles and application as it applies to industrial plants, commercial facilities and power plants. Presented from a straightforward perspective, this course focuses on technical issues often encountered during work.

Find out more »

Application & Testing Electro-Mechanical & Microprocessor Relays (Basic)

August 20, 2019 - August 22, 2019
Tulsa Training Facility, 7780 E 106th Street
Tulsa, OK 74133 United States
+ Google Map

This Application and Testing Electro-Mechanical and Microprocessor Relays course covers the testing of simple overcurrent relays such as time overcurrent, under/overvoltage and over/under frequency electro-mechanical relays. The course will start with basic level instruction on the construction and principles of electro-mechanical /microprocessor relays, including different components of the relay that need calibration and adjustments as part of testing. A brief description of the relays’ operating principles will also be presented, followed by hands-on testing of the relays using Doble relay test sets.

Find out more »

Schematic Electrical Print Reading

August 20, 2019 - August 22, 2019
Tulsa Training Facility, 7780 E 106th Street
Tulsa, OK 74133 United States
+ Google Map

Those who attend the Schematic Electrical Print Reading course will be led through this fast-paced three day course by a current field trainer and former substation technician. Robert brings 36 years of experience in the electrical field. He is eager to share his experiences in using electrical prints for maintenance, troubleshooting, relaying, metering, equipment commissioning, and, most importantly, safety while switching.

Find out more »

RTS Developer

August 27, 2019 - August 28, 2019
Tulsa Training Facility, 7780 E 106th Street
Tulsa, OK 74133 United States
+ Google Map

The RTS interface is built entirely for test manipulation. During the RTS Developer Training course, attendees will be exposed to all of the numerous tools and techniques available for creating or customizing any test routine. Moving beyond test plan modification, attendees will learn about RTS commands and gain insights that will be useful as they develop new test routines of their own.

Find out more »

September 2019

Application & Testing Electro-Mechanical & Microprocessor Relays (Basic)

September 4, 2019 - September 6, 2019
Doble Engineering Company (Morrisville, NC), 2200 Gateway Centre Blvd (Suite 207)
Morrisville, NC 27560 United States
+ Google Map

This Application and Testing Electro-Mechanical and Microprocessor Relays course covers the testing of simple overcurrent relays such as time overcurrent, under/overvoltage and over/under frequency electro-mechanical relays. The course will start with basic level instruction on the construction and principles of electro-mechanical /microprocessor relays, including different components of the relay that need calibration and adjustments as part of testing. A brief description of the relays’ operating principles will also be presented, followed by hands-on testing of the relays using Doble relay test sets.

Find out more »

RTS Advanced Developer

September 17, 2019 - September 19, 2019
Tulsa Training Facility, 7780 E 106th Street
Tulsa, OK 74133 United States
+ Google Map

During the RTS Advanced Developer Training, years of behind-the-scenes development will be exposed. This course takes an in-depth look at the newest advancements available with RTS software and presents insights on the virtually limitless possibilities of this powerful relay testing application.

Find out more »

October 2019

Application & Testing Electro-Mechanical & Microprocessor Relays (Intermediate)

October 1, 2019 - October 3, 2019
Doble Engineering Company (Morrisville, NC), 2200 Gateway Centre Blvd (Suite 207)
Morrisville, NC 27560 United States
+ Google Map

This Application and Testing Electro-Mechanical and Microprocessor Relays course covers the testing of distance, differential, rate of change of frequency, loss of field, reverse power and synchronizing relays. The course will start with intermediate level instruction on the construction and principles of electro-mechanical /microprocessor relays, including different components of the relay that need calibration and adjustments as part of testing. A brief description of the relays’ operating principles will also be presented, followed by hands-on testing of the relays using Doble relay test sets.

Find out more »

Doble Client Committee Meetings & Conference

October 6, 2019 - October 10, 2019
The Westin Bayshore, Vancouver, 1601 Bayshore Drive
Vancouver, British Columbia V6G 2V4 Canada
+ Google Map
Doble Client Committee Meetings

The Client Committee Meetings and Conference is an exclusive event for utility, testing and industrial clients with a Doble Service Agreement. The meetings facilitate an open dialogue between you and your peers about safety, asset health and maintenance issues, focused on problem-solving and collaboration though training and peer-to-peer knowledge sharing.

Find out more »

2019 Circuit Breaker Seminar

October 14, 2019 - October 18, 2019
Hyatt Regency Atlanta, 265 Peachtree Street NE
Atlanta, GA 30303 United States
+ Google Map

Join us for a week of circuit breaker test and maintenance training where you and your team learn from the brightest minds in the industry.

Find out more »

Application & Testing Electro-Mechanical & Microprocessor Relays (Advanced)

October 15, 2019 - October 17, 2019
Doble Engineering Company (Morrisville, NC), 2200 Gateway Centre Blvd (Suite 207)
Morrisville, NC 27560 United States
+ Google Map

This Application and Testing Electro-Mechanical and Microprocessor Relays course covers advanced testing involving communication assisted protection, analysis of event reports, COMTRADE and ss1 files, line current differential relays, bus differential and out-of step protection testing.

Find out more »

Application & Testing Electro-Mechanical & Microprocessor Relays (Basic)

October 15, 2019 - October 17, 2019
Tulsa Training Facility, 7780 E 106th Street
Tulsa, OK 74133 United States
+ Google Map

This Application and Testing Electro-Mechanical and Microprocessor Relays course covers the testing of simple overcurrent relays such as time overcurrent, under/overvoltage and over/under frequency electro-mechanical relays. The course will start with basic level instruction on the construction and principles of electro-mechanical /microprocessor relays, including different components of the relay that need calibration and adjustments as part of testing. A brief description of the relays’ operating principles will also be presented, followed by hands-on testing of the relays using Doble relay test sets.

Find out more »

2019 Circuit Breaker Seminar Industry Expo

October 15, 2019 - October 16, 2019
Hyatt Regency Atlanta, 265 Peachtree Street NE
Atlanta, GA 30303 United States
+ Google Map

Join us for a week of circuit breaker test and maintenance training where you and your team learn from the brightest minds in the industry.

Find out more »

EuroDoble Colloquium

October 20, 2019 - October 23, 2019

Being in the power industry means you face a long list of challenges and concerns. At EuroDoble, we bring you together with your peers to discuss the pressing topics that impact your job – all to ensure the reliable flow of power.

Find out more »

RTS Essentials

October 22, 2019 - October 23, 2019
Tulsa Training Facility, 7780 E 106th Street
Tulsa, OK 74133 United States
+ Google Map

RTS Essentials provides a chance to get up-to-speed in a hurry. Technicians and engineers who are new to relay testing that need to learn the basics behind what RTS does and get proficient with using RTS will want to attend this course.

Find out more »

November 2019

Schematic Electrical Print Reading

November 5, 2019 - November 7, 2019
Tulsa Training Facility, 7780 E 106th Street
Tulsa, OK 74133 United States
+ Google Map

Those who attend the Schematic Electrical Print Reading course will be led through this fast-paced three day course by a current field trainer and former substation technician. Robert brings 36 years of experience in the electrical field. He is eager to share his experiences in using electrical prints for maintenance, troubleshooting, relaying, metering, equipment commissioning, and, most importantly, safety while switching.

Find out more »

Essentials of Protection – Beginners Level for Technicians

November 12, 2019 - November 14, 2019
Doble Engineering Company (Morrisville, NC), 2200 Gateway Centre Blvd (Suite 207)
Morrisville, NC 27560 United States
+ Google Map

A must for technicians who are setting out to build a career in relay testing. This course has all the basics to propel you forward and prepare you with the tools and techniques you need.

Find out more »

Basics of Protection for Utilities

November 19, 2019 - November 21, 2019
Doble Engineering Company (Morrisville, NC), 2200 Gateway Centre Blvd (Suite 207)
Morrisville, NC 27560 United States
+ Google Map

The Basics of Protection Course for Utilities is designed to provide a practical overview of protection principles and application as it applies to electric utilities. Presented from a straightforward perspective, this course focuses on technical issues often encountered during work.

Find out more »

RTS Developer

November 19, 2019 - November 20, 2019
Tulsa Training Facility, 7780 E 106th Street
Tulsa, OK 74133 United States
+ Google Map

The RTS interface is built entirely for test manipulation. During the RTS Developer Training course, attendees will be exposed to all of the numerous tools and techniques available for creating or customizing any test routine. Moving beyond test plan modification, attendees will learn about RTS commands and gain insights that will be useful as they develop new test routines of their own.

Find out more »

December 2019

Basics of Protection for Industrials

December 3, 2019 - December 5, 2019
Doble Engineering Company (Morrisville, NC), 2200 Gateway Centre Blvd (Suite 207)
Morrisville, NC 27560 United States
+ Google Map

The Basics of Protection Course for Industrials is designed to provide a practical overview of protection principles and application as it applies to industrial plants, commercial facilities and power plants. Presented from a straightforward perspective, this course focuses on technical issues often encountered during work.

Find out more »

Application & Testing Electro-Mechanical & Microprocessor Relays (Basic)

December 10, 2019 - December 12, 2019
Tulsa Training Facility, 7780 E 106th Street
Tulsa, OK 74133 United States
+ Google Map

This Application and Testing Electro-Mechanical and Microprocessor Relays course covers the testing of simple overcurrent relays such as time overcurrent, under/overvoltage and over/under frequency electro-mechanical relays. The course will start with basic level instruction on the construction and principles of electro-mechanical /microprocessor relays, including different components of the relay that need calibration and adjustments as part of testing. A brief description of the relays’ operating principles will also be presented, followed by hands-on testing of the relays using Doble relay test sets.

Find out more »

Application & Testing Electro-Mechanical & Microprocessor Relays (Basic)

December 17, 2019 - December 19, 2019
Doble Engineering Company (Morrisville, NC), 2200 Gateway Centre Blvd (Suite 207)
Morrisville, NC 27560 United States
+ Google Map

This Application and Testing Electro-Mechanical and Microprocessor Relays course covers the testing of simple overcurrent relays such as time overcurrent, under/overvoltage and over/under frequency electro-mechanical relays. The course will start with basic level instruction on the construction and principles of electro-mechanical /microprocessor relays, including different components of the relay that need calibration and adjustments as part of testing. A brief description of the relays’ operating principles will also be presented, followed by hands-on testing of the relays using Doble relay test sets.

Find out more »
+ Export Events

Doble Engineering Company

Doble Engineering Company