Phenix Technologies manufactures a complete line of DC Dielectric Test Sets available at nearly any voltage power rating required. Perform accurate testing of electrical switchgear, cables, motors, generators, and protective equipment.
OVERVIEW
- Insulation Testing
- Cables
- Transformers
- Insulators
- Bushings
- Valves (IEC 62501 and IEC 60700)
- Utility HV Power Supply
- R & D tests
- Miscellaneous evaluations
- Educational demonstrations
- Suitable for performing HVDC withstand tests and partial discharge measurements on all HVDC transmission equipment
- Stackable multiple modules in 334 kV or 500 kV increments for higher voltage
- 20 mA and 50 mA outputs available
TESTING APPLICATIONS
Insulation Testing
- Cables
- Transformers
- Insulators
- Bushings
- Valves (IEC 62501 and IEC 60700)
Utility HV Power Supply
- R & D tests
- Miscellaneous evaluations
- Educational demonstrations
Suitable for performing HVDC withstand tests and partial discharge measurements on all HVDC transmission equipment
PHENIX ADVANTAGES
- Stackable multiple modules in 300 kV or 500 kV increments for higher voltage
- Low PD specification
- High charge current ratings and low ripple voltage output provided by the cascaded full wave voltage doubler design
- Fast motorized polarity reversal
- Internal voltage divider provided for direct voltage measurement in accordance with IEEE Standard 4 and IEC 60060-2
- Combination divider, discharge, grounding device – Discharge device (optional) – Grounding switch (optional) – PD measurement capacitors (optional)
- Output series resistor included
- Castors or air pallet for mobility (optional)
- Available with smooth surface FRP insulator housing for laboratory use, or ribbed composite insulator housing for extended operation in an industrial environment
- PC software package for data acquisition and report generation
RESOURCES
Phenix Bucket Truck Testing
ALL DC DIELECTRIC HIGH POTENTIAL (HIPOT) TEST SYSTEMS
